These "see through' collapsible gates are very strong and compact. Manufactured using double vertical pickets, connected by solid steel lattice bars and working on the "lazy tong" principal for ease of operation. Full height bars are fitted between each pair of pickets to enable gate to reject a 76mm diameter sphere. Ideally suited to Goods only lifts, providing maximum clear opening and minimum bunch. Mid-bar gates are top hung and can operate on either dee-bar or rolled two part section top tracks. Galvanised finish is standard, but polyester powder coating is an additional option, together with fabricated leading edges, recessed pull handles and recessed Mathews retaining catches. All gates are manufactured to suit each individual opening.

Earlswood Safeguard Full Height Mid Bar Gates

Earlswood Full Mid Bar Car Gates to be installed on goods lifts only, when installing imperforate shutters are impractical.

Specification

Hot rolled mild steel lattice bars pass through heavy duty 16mm double pickets, fitted with case hardened pulley wheels running on either a flat bar or two section box type top track. Cast bottom guides fitted between pickets run in a 25mm x 25mm channel section bottom track. Full mid bars are fitted between vertical pickets.
Gates over 3000mm overall width must be hung from two section pressed top track

Accessories

Vision panel, 229mm leaves, Mathews catch, lock preparation and landing frames. Installation and repairs service by our trained engineers.

BUNCH CHART FOR SAFEGUARD FULL HEIGHT MIDBAR GATES